Remote Camera System Requirements; Installing The Remote Camera Driver - Minolta Dimage X20 Instruction Manual

REMOTE CAMERA SYSTEM REQUIREMENTS

For the camera to be connected directly to the
Minimum system requirements
computer and used as a remote imaging
Pentium II 300MHz or later
device, the computer must be equipped with a
USB port as a standard interface. The computer
Windows 98 Second Edition, Me, 2000
Professional, and XP(Home, Professional)
and the operating system must be guaranteed
by their manufacturers to support USB inter-
128MB of RAM. 256MB with Windows XP.
face. See chart for system requirements.
200MB of hard-disk space
800 X 600 16-bit color monitor
The remote-camera driver software must be
installed. Specific application software, such as
Remote camera tested with Microsoft Net
Microsoft Net Meeting, is required to view the
Meeting and Windows Messenger.
images. This function cannot be used with
Macintosh computers.

INSTALLING THE REMOTE CAMERA DRIVER

The driver needs only to be installed once. This driver is
not compatible with Macintosh operating systems.
Before connecting the camera to the computer, place the
DiMAGE Viewer CD-ROM in the CD-ROM drive. The
DiMAGE installer menu should automatically activate. To
install the driver, click on the DiMAGE remote-camera
installer button.
D -
ATA TRANSFER MODE
104