Minolta Dimage X20 Instruction Manual page 17

Using strap A
Turn the strap eyelet so
that strap A can pass
2
through it.(1)
1
Pass the small loop of strap A through
the strap eyelet on the camera body
(2).
Pass the other end of the strap through the small
loop and tighten (3).
3
Using both straps A and B
1
Pass the small loop of strap B
through the other strap eyelet
or the loop of strap A (1).
2
Pass the end of strap B
through the link of the strap A
(2).
Pass the tip of strap B through
the buckle and pull to tighten
1
3
(3).
Slide the holder ring over the
tip (4).
4
17