Drive Modes - Minolta Dimage X20 Instruction Manual

DRIVE MODES

Single-frame advance - to take a single image each time the shutter-release button is
pressed. This is the camera's default setting.
Self-timer - to delay the release of the shutter (p. 39). Used for self-portraits.
Continuous advance - to take multiple images when the shutter-release button is
pressed and held (p. 40).
Multi frame - to capture a series of nine thumbnails within an image when the shutter
-release button is pressed once (p. 41).
Self-portrait - to take a self-portrait using the self-portrait mirror on the front of the
camera (p. 41).
38 R -
ECORDING ADVANCED OPERATION
38 R -
ECORDING ADVANCED OPERATION
single-frame advance when the camera is turned off.
The drive modes control the rate
and method of image capture.
Indicators indicating the selected
drive mode appear on the monitor.
The drive mode is selected in the
main menu of the recording-mode
(p. 34). If auto reset (p. 52) is
active, the drive mode is reset to