Installing And Removing A Memory Card - Minolta DIMAGE E323 Instruction Manual

Hide thumbs Also See for DIMAGE E323:

Table of Contents

2729_E_A_print.qxd

03.7.11

11:11 AM

AC ADAPTER (SOLD SEPARATELY)

Always turn off the camera before changing between power supplies.

The AC adapter AC-7 or AC-7E allows the camera to be powered from a household

outlet. The AC adapter is recommended when the camera is interfaced with a computer

or during periods of heavy use. AC adapter model AC-7 is for use in North America and

Taiwan, and AC-7E is for use in all other areas. The batteries cannot be charged using

the AC adapter.

Insert the mini plug of the AC adapter into the DC terminal (1).

Insert the AC adapter plug into an electrical outlet.

ETTING UP AND RUNNING

Page 14

INSTALLING AND REMOVING A MEMORY CARD

Always turn off the camera and confirm that the orange indicator lamp is not

lit before changing the memory card, otherwise the card may be damaged,

and data lost.

Every memory card including the supplied card must be reformatted with

this camera model before use (p. 20).

An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera

to operate.

Open the battery-chamber door (1).

Insert the memory card all the way into the card slot and

then release (2). The card should catch in the slot.

Insert the card so the face is toward the front of the

camera. Always push the card in straight, never at an

angle. Never force the card. If the card does not fit, check

that it is orientated correctly.

To eject a memory card, press the card into the slot and

release (3). The card can now be pulled out.

Close the battery-chamber door and slide it toward the

body to engage the safety catch (4).

Table of Contents