Remote Off-Camera Ttl Flash - Minolta Dynax 7xi Instruction Manual

REMOTE OFF-CAMERA FLASH CONTROL
When used with specified xi flash units, this camera offers you the flexibility
of remote off-camera flash control with TTL flash metering. The flash unit has
more than one control channel so that if you are working near someone who
is using a similar set-up, you will not interfere with each other. The flash must
be mounted on the camera when you change the control channel.
1. Attach the flash to the camera and turn it on.
• To change the control channel, move the control channel selector in the
battery chamber of the flash to 1 or 2.
2. Press the flash mode button in the card door, turn either the front or rear
control dial, and select remote off camera flash mode.
3. Remove the flash and position it according to the table with its AF
illuminator pointing at the subject.
70
- NEXTPAGE -