Disconnecting The Camera From The Computer; Windows 98 And 98 Second Edition; Windows Me, 2000 Professional, And Xp - Minolta DiMAGE F200 Instruction Manual

Disconnecting the camera from the computer

Never disconnect the camera when the access lamp is red - the data or
Windows 98 / 98 Second Edition
Confirm that the access lamp is not lit. Turn the mode dial to another position and then disconnect
the USB cable.

Windows Me, 2000 Professional, and XP

To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then discon-
nect the USB cable.
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
116 -
D
ATA TRANSFER MODE
memory card may permanently be damaged.