Minolta DiMAGE F200 Instruction Manual page 43

Compose the picture as described in the basic
recording operation section (p. 26). Press the
shutter-release button partway down (1) to
lock onto the subject and set the exposure for
the series. Press and hold the shutter-release
button all the way down (2) to make the brack-
et series; three consecutive images will be
captured. Focus is locked with the first frame.
The remaining number of frames in the bracket series is displayed on the monitor next to the bracket-
ing icon. If the memory is filled or the shutter button is released before the series has completed, the
camera will reset and the entire bracket must be made again. If the red low-battery indicator appears,
the bracketing drive mode is disabled. The flash cannot be used with the bracketing drive mode.
When using exposure compensation (p. 51), the bracketing series will be made in relation to the
compensated exposure. Under extreme conditions, one of the bracketed exposures may be inaccu-
rate because it is outside the exposure control range of the camera.
Number of frames in
bracketing series
Frame counter
1
2
43