Disconnecting The Camera From The Computer - Minolta Dimage 7Hi Owner's Manual

DISCONNECTING THE CAMERA FROM THE COMPUTER

Never disconnect the camera when the access lamp is lit - the data or
memory card may permanently be damaged.
WINDOWS 98 / 98 SECOND EDITION
Confirm that the access lamp is not lit. Turn the mode dial to another position and then
disconnect the USB cable.
WINDOWS ME, 2000 PROFESSIONAL, AND XP
To disconnect the camera, click once on the unplug-or-eject-hardware icon
located on the task bar. A small window will open indicating the device to
be stopped.
Click on the small window to stop
the device. The safe-to-remove-
hardware window will open. Turn
the mode dial to another position
and then disconnect the USB
cable.
When more than one external device are connected to the computer, repeat the proce-
dure above except right click on the unplug-or-eject-hardware icon. This will open the
unplug-or-eject-hardware window after clicking on the small window indicating the
unplug-or-eject-hardware routine.
142
D -
ATA TRANSFER MODE
The hardware devices to be stopped will be
displayed. Highlight the device by clicking on
it then click "Stop."
A confirmation screen will appear to
indicate the devices to be stopped.
Clicking "OK" will stop the device.
A third and final screen will appear
to indicate the camera can be safe-
ly disconnected from the computer;
click OK. Turn the mode dial to
another position and then discon-
nect the USB cable.
MACINTOSH
Confirm that the access lamp is not lit and then
drag the mass-storage device icon and drop it into
the trash. Disconnect the USB cable.
143