Disconnecting The Camera From A Computer; Windows 98 And 98Se; Windows Me, 2000 Professional, And Xp - Minolta DiMAGE E323 Instruction Manual

DISCONNECTING THE CAMERA FROM A COMPUTER

Never disconnect the camera when the indicator lamp is orange - the data
or memory card may permanently be damaged.
Windows 98 / 98 Second Edition
Confirm that the orange indicator lamp is not lit. Turn the camera off, and then disconnect the USB
cable.

Windows Me, 2000 Professional, and XP

To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then discon-
nect the USB cable.
When more than one external device is connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
79