Battery Condition Indicator; Auto Power Off - Minolta DiMAGE E223 Instruction Manual

When replacing batteries, the date information will reset if there are no batteries in the camera for a
few minutes. See page 14 if the date reset.

Battery condition indicator

This camera is equipped with an automatic battery-
condition indicator. When the camera is on, the bat-
tery-condition indicator appears on the LCD monitor. If
it does not appear, the battery may be exhausted or
installed incorrectly.
Full-battery indicator - the battery is fully charged.
Low-battery indicator - battery power is low. The battery should be
replaced soon.
Low-battery warning - battery power is very low. The icon is red. The
battery should be replaced as soon as possible.
Replace-battery message - power is insufficient for camera operation. Indicator
lamp by the viewfinder turns red and blinks. Change the batteries. The shutter will
not release.

Auto power off

To conserve battery power, the camera will shut down if an operation is not made within three min-
utes. To restore power, press the main switch.
12 GETTING UP AND RUNNING