Minolta DiMAGE E223 Instruction Manual page 57

Problem
Monitor turns off and the
orange indicator lamp
blinks.
While using flash, the
pictures are too dark.
Exposure-compensation
display turns red.
No-image message
appears in playback mode.
Error or zoom-error
message appears.
If the camera does not function normally, turn it off, remove and reinsert the batteries, or unplug and
reconnect the AC adapter. If the camera has become hot with extended use, wait for it to cool before
removing or disconnecting the power supply. Always turn the camera off with the main switch, other-
wise the memory card may be damaged and camera settings reset.
Cause
Flash is charging.
The subject is beyond the flash range (p. 27).
Scene is too bright or dark and outside the
exposure range of the camera.
Different memory type is selected.
Remove and reinsert the batteries, or unplug and reconnect the AC adapter.
Solution
Wait until the monitor image is visible
and the orange indicator lamp glows.
Move closer to the subject.
Change the setting until the display
is white.
Select the memory type (internal
memory or memory card) where the
images were saved (p. 45).
57