Arranging The Drain Hose - Miele heat pump dryer Operating Instructions Manual

Installation and connection

Arranging the drain hose


Do not pull on the drain hose
and do not stretch it or allow it to be‐
come kinked.
This could damage the hose.
There will be a small amount of residual
water left in the drain hose. Have a con‐
tainer ready to collect this.
 Pull the drain hose off its connection.
 Unwind the hose and pull it carefully
out of the holders.
 Allow any residual water to run into
the container.
64
 Guide the hose to the right or left
side of the dryer, as required.
– If you are guiding it to the right you
can fit the hose into the groove.
– Leave the hose in the lower holder to
prevent it from being kinked by mis‐
take.