Appliance Switch-Off; Memory; Anti-Crease - Miele heat pump dryer Operating Instructions Manual

Settings menu

Appliance switch-off

To save energy the dryer will switch
off automatically after 15 minutes. You
can lengthen or shorten the time.
The dryer will switch off after 10, 15 or
20 minutes,
– if no further selection is made after
switching the dryer on
– at the end of the anti-crease phase
– after a programme without an anti-
crease phase has finished.
However, there is no automatic switch-
off in the event of a fault.
Options
– after 10 minutes
– after 15 minutes (factory default)
– after 20 minutes.

Memory

The electronics will store in memory a
drying level or options for a selected
programme. The duration selected for
a timed drying programme will also be
stored in memory. These settings will
then appear the next time the pro‐
gramme is chosen.
Options
– Off (factory default)
– On
Exception:
The Cottons  programme will re‐
main unchanged.
80

Anti-crease

If you have pressed the Anti-crease
button:
the drum will continue to rotate in a
special anti-crease rhythm for a maxi‐
mum of 2 hours after the end of the
drying process. This helps prevent
creasing if laundry is not going to be
removed immediately. You can reduce
the duration of the anti-crease phase.
Options
– 1 hr
– 2 hr (factory default)