Settings; User Settings; City Mode Default; Intellimute Mode - Cobra XRS 9940 Operating Instructions Manual

12 band maximum performance digital radar/laser detector with super-xtreme range superheterodyne technology
Hide thumbs Also See for XRS 9940:
Table of Contents

Advertisement

Spreads.qxd
11/9/07
12:19 PM

Settings

Your Detector

User Settings

IntelliShield City Mode Default
City Mode Default makes three levels of Audio Alert suppression available
when you toggle from Highway to City mode (see page 8). The factory setting
is City X.
City X sounds a single beep when an x band signal is first detected.
The alert then sounds when signal strength reaches level 3.
City X+K combines the City X mode with prevention of K band audio
alerts until the signal strength reaches level 2.
City X Beep Off blocks all X band audio alerts until the signal strength
reaches level 3.

IntelliMute Mode

IntelliMute is a unique feature that allows you to avoid alerts you don't need to
hear because you are stopped or moving slowly. By sensing the "revs" (RPMs)
of your engine, IntelliMute knows when you are at low speed and automatically
mutes alerts (except for strobe signals from emergency vehicles). It works with
all City and Auto Mute modes.
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 15). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled each
time the power is turned on. The factory setting is IntelliMute off.
An IntelliMute icon will appear in the display when IntelliMute is on and activation
is set. Whenever engine revs are below the activation point, the arrow points
down. When revs are above the activation point the arrow points up.
Above
Below
Activation Point
Activation Point
If, for any reason, the unit stops sensing your engine's revs, IntelliMute will
indicate an error and automatically turn off.
14 English
Page 14
Detection
Your Detector
Laser Signals and Visual Displays
Strobe Alert Signals and Visual Displays
Type of Signal
Visual Display Voice
LTI 20-20*
Laser Alert
LTI Ultra-Lyte*
Laser Alert
Kustom Signals
Laser Alert
ProLaser*
Kustom Signals
Laser Alert
ProLaser III*
* Your detector provides 360˚ detection of these signals.
NOTE
Beep rate changes with different laser alerts.
Type of Signal
Visual Display Voice
3M Opticom or
Emergency Vehicle
Tomar*
Approaching
* Your detector provides 360˚ detection of these signals.
Nothing Comes Close to a Cobra
®
23

Advertisement

Table of Contents
loading

Table of Contents