Spreads.qxd
11/9/07
12:19 PM
Getting Started
Your Detector
Display Timeout Mode
Your detector has a Display Timeout mode to prolong
the life of your screen. Touch any button to exit Display
Timeout and recall the Standby screen.
The factory default is for Display Timeout to engage
from the Standby screen after 30 seconds. You can
change the time interval or deactivate Display Timeout
in programming mode (see page 10).
NOTE
In Display Timeout mode, the display will show a small dot
moving slowly back and forth to indicate the unit is turned on.
IntelliShield Highway/City Modes
Your detector is equipped with IntelliShield false signal rejection technology
which consists of a Highway mode and three different levels of City modes:
City X, City X Beep Off and City X+K.
Highway mode provides full response to all signals detected. The City modes
reduce false alerts while you are driving in or near urban areas where there
are many sources for conflicting X or K band signals such as microwave
towers and automatic door openers. The factory setting is Highway. The
factory City mode default setting is City X; it can be changed in programming
mode (see page 11).
You can toggle between Highway and City modes by pressing the City
NOTE
When you change to City mode, the unit will enter
whichever city default mode is set at the time.
English
8
Page 8
button.
City
Button
Press and release
Specifications
Your Detector
Specifications
•
Band and Frequencies
Band
X Band
K Band
Safety Alert
Traffic Warning
System
Ka Band
Ku Band
VG-2
•
Spectre 1
Laser
Strobe
This radar detector is covered by one or more of the following U.S. patents:
5,497,148; 5,594,432; 5,612,685; 6,078,279; 6,094,148; 6,621,447.
Additional patents may be listed inside the product or pending.
•
Frequencies
10.525
± 0.050
GHz
24.125
± 0.125
GHz
24.070
± 0.010
GHz
24.110
± 0.010
GHz
24.190
± 0.010
GHz
24.230
± 0.010
GHz
34.700
± 1.300
GHz
13.435
± 0.050
GHz
11.500
± 0.250
GHz
13.300
± 0.200
GHz
910
± 50
nm
700
± 300
nm
Nothing Comes Close to a Cobra
®
29