Overview - Cobra XRS 9940 Operating Instructions Manual

12 band maximum performance digital radar/laser detector with super-xtreme range superheterodyne technology
Hide thumbs Also See for XRS 9940:
Table of Contents

Advertisement

Spreads.qxd
11/9/07
12:19 PM

Overview

Introduction
This manual describes the simple steps for mounting, setting up and using your
detector. It also provides helpful information about how radar and laser guns are
used and how you can interpret the alerts you receive.
Before you begin your installation, please read the Important Information section
on page A1 and use the descriptions and feature lists on pages A2 and A3 to
become familiar with your new detector.
About Your Detector
Display
This detector's innovative new display provides more, easier-to-use information
than any technology to date. Using an OLED (Organic Light Emitting Diode)
screen, the display offers large graphical alerts to signals as they are detected.
Do not be alarmed by the nearly blank display you see when you first turn the
unit on. The detector will function and alerts will appear as signals are detected.
You can also elect to turn on the built-in Compass, IntelliMute and Car Voltage,
so that they appear during normal operation. The initial and startup screens are
shown on page 6.
Programming
EasySet Programming lets you conveniently customize the operation of your
detector by changing the settings. You may want to start using the detector
with the factory settings and then make changes after you are more familiar
with the unit.
About This Manual
Please take a moment to learn about some special features of this manual.
Modular Descriptions
Once the detector is in use, this manual can be used as a ready reference to
individual topics as needed. Each topic is completely covered in its section and
cross-references to related topics are included where appropriate.
Appendix
The appendix pages 34–36 provide quick reference charts on the programming
features of your detector.
English
2
Page 2
Appendix
Appendix
Introduction
User Programming Menu Guide (continued)
Visual
Mode
Tone
Display
Set
Two
Smart-
beeps
Power
mode
One
beep
Page 18
Set Display
One
Timeout
beep
Interval
SECONDS
Page 18
Two
beeps
SECONDS
One
beep
MINUTE
One
beep
MINUTES
One
beep
ALWAYS
Two
Set display
beeps
Dim mode
default
One
Page 18
beep
One
beep
Voice
Mode
Tone
Smart
Set
Two
Power
customizable
beeps
On
display
colors***
Smart
One
Power
Page 18
beep
Off
15
Set car
Two
Seconds
15
battery
beeps
voltage
30
display
One
30
Seconds
mode
beep
Page 19
One
Set battery
Two
ONE
Minute
low car
beeps
voltage
Three
warning
THREE
Minutes
One
Page 19
beep
Always
On
ON
Restore
Two
Dim
factory
beeps
settings
Page 19
Dimmer
***
Press Dim
repeatedly for all optional colors.
Dark
NOTE
Factory defaults are highlighted in
light gray. See referenced pages for
more information on the modes.
Nothing Comes Close to a Cobra
Nothing Comes Close to a Cobra
Visual
Voice
Display
Multi
Red
Blue
Orange
Green
Display
Car Volt-
age Off
Display
Car Volt-
age On
Car
Voltage
Warning
Off
Car
Voltage
Warning
On
Restore
Factory
Settings
®
®
35
35

Advertisement

Table of Contents
loading

Table of Contents