Settings; Highway/City Mode - Cobra RAD350 Operating Instructions Manual

Your Detector

Settings

Sens Mode
Setting your detector to City mode sensitivity delays all X band audio alerts at
lower signal strength levels. (A single beep will sound when the signal is first
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what you will
see and hear as you complete each step. The factory setting is Highway mode.
Highway Mode
h
X K Ka V
City Mode
c
X K Ka V
To Change From Highway Mode To City Mode
Press and release
the SEN button.
To Change From City Mode To Highway Mode
Press and release
the SEN button
again.
6 English
Settings
SEN Button
Press and
release
Audible Tone
One beep
Audible Tone
Two beeps
Visual Display
c
appears in the display
Visual Display
h
appears in the display
•