Alarm Action - Panasonic WV-SFV310 Operating Instructions Manual

14 Configure the settings related to advanced view [Advanced view]
Clicking on the outside of the outline adds a new outline.
Streams that are configured in cropping use the same cropping area as the [Cropping] display. Therefore,
if the cropping outline is changed, the cropping area of streams configured in cropping are changed
according to the settings of the cropping outline.
[Cropping]
Either one of JPEG(1), JPEG(2), JPEG(3), H.264(1), H.264(2), H.264(3), or H.264(4) images, or all H.264
images can be selected to be sent as cropping images.
The images capture size selected for JPEG(1)/JPEG(2)/JPEG(3)/H.264(1)/H.264(2)/H.264(3)/H.264(4) on the
[JPEG/H.264] tab is used for the cropping image capture size.
Off: cropping images are not transmitted.
H.264(1): H.264(1) is transmitted as cropping images.
H.264(2): H.264(2) is transmitted as cropping images.
H.264(3): H.264(3) is transmitted as cropping images.
H.264(4): H.264(4) is transmitted as cropping images.
H.264(all): H.264(1), H.264(2), H.264(3), and H.264(4) are transmitted as cropping images.
JPEG(1): JPEG(1) is transmitted as cropping images.
JPEG(2): JPEG(2) is transmitted as cropping images.
JPEG(3): JPEG(3) is transmitted as cropping images.
•
Default: Off
Note
•
Changing the cropping settings temporarily stops transmission.
•
When the "H.264 transmission" is set to "Off", cropping setting for H.264(1), H.264(2), H.264(3), H.
264(4) cannot be set.
•
When maximum resolution is set, cropping setting for H.264(1), H.264(2), and JPEG(1) cannot be set.
[Area]
When selecting a cropping area in the screen, it will be numbered as area 1.
[Status]
Select "On" or "Off" to determine whether or not to use the cropping area.
On: The cropping area will be set.
Off: The cropping area will not be set.
Default: Off
[Delete] button
Click the [Delete] button corresponding to the area to be deleted. The outline of the selected area will be
deleted.

[Alarm action]

Determine whether to transfer cropping images when an alarm occurs. Transferring cropping images is
available only when a setting other than "H.264(all)" is selected for "Cropping".
On/Off
Default: Off
[Home area]
Configure the area for cropping transmission when an alarm occurs.
1/2/3/4
Default: 1
132 Operating Instructions