Finishing; Door Installation / Removal; Removing The Valve Access Door - Napoleon BGD42CFN Installation And Operating Instructions Manual

6.0 FINISHING

THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALS
SUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT GO
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
6.1

DOOR INSTALLATION / REMOVAL

THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
Before the glass door can be removed, the
faceplate trim and valve access door must be
removed.
The glass door is secured to the top front edge
of the  rebox with two latches. Pull the handles
of the latches forward, then lift the latches out
from the door frame to release the top of the
door. Next, pivot the door forward until the top
edge clears the front of the appliance. Carefully
grip the sides of the door lifting it out from the
retainer along the bottom of the door.
6.2

REMOVING THE VALVE ACCESS DOOR

The valve access door rotates on the pins attached to the side frame. Lift the valve ac-
cess door off the pins to operate the main glass door.
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
BELOW THE SPECIFIED DIMENSION AS ILLUSTRATED.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
WARNING
!
RISK OF FIRE!
WARNING
!
31
72.1A
75.1
W415-0779 / D / 08.13.12