Calls Via Mobile Phones - Konftel 300W User Manual

 Indicate whether you want to connect a call with one user or several users in the
computer's VoIP software.
The Konftel 300W functions as a speaker and microphone for the computer.
Answering a VoiP call
 Press .
The Konftel 300W has now been put into call mode and the LEDs show a steady blue light.
 Indicate whether you want to start the call by answering in the computer's VoIP
software.
The Konftel 300W functions as a speaker and microphone for the computer.
Ending a VoiP call
End the call in the computer's VoIP software and put the Konftel 300W on stand-by

by pressing .
The Konftel 300W now only functions as a speaker for the computer.

CAlls ViA MobilE PHonEs

For these instructions, it is assumed that the Konftel 300W is connected to a mobile
phone via a cable (optional accessory).
select mobile as the telephone line
Press linE MoDE and select MOBILE as a phone line. Press oK to confirm.

The box in front of MOBILE is filled in which indicates that this connectivity option can be used
for calls.
 Other connectivity options can be deselected in the same way if they are not going
to be used.
You can combine all available connectivity options.

 Press the linE MoDE key again to close the line mode.
You can add another line, end a line or switch between connected lines during a call.

Making calls using a mobile phone
 Press to activate Konftel 300W.
 Dial the number on the mobile phone as you normally would.
The Konftel 300W now functions as a speaker and microphone for the mobile phone. The LEDs
show a steady blue light.
Ending calls
 Ending the call on the mobile phone.
 Press to turn off the Konftel 300W.
AnsWERinG AnD MAKinG CAlls
15