Table of Contents
Advertisement
ANSWERING AND MAKING CALLS
MAKING THREE-WAY CALLS (DECT)
The simplest way to set up a multi-party call is to use the conference guide (see page 19).
You can connect another party to an on-going call as follows. During a call, the
acts as Flash/R-pulse, which means it transmits commands to the PBX.
This description applies for DECT calls only.
Press
during a call .
The calls is put on hold and a second dialling tone is heard.
Dial the second participant's number and wait for an answer.
Press the
button to connect all the meeting participants.
VOIP CALLS VIA A COMPUTER
For these instructions, it is assumed that the computer is turned on, the VoIP software
(e.g. web meeting software or Skype
via the USB cable to the computer and that Konftel 300Wx USB Audio is selected as the
sound device in the computer's settings.
Making VoIP calls
Make the call (or answer an incoming call) using the computer's VoIP software.
The microphone is automatically activated and the LEDs show a steady blue light.
Ending a VoIP call
End the call in the computer's VoIP software.
The Konftel 300Wx now only functions as a speaker for the computer.
CALLS VIA MOBILE PHONES
For these instructions, it is assumed that the Konftel 300Wx is connected to a mobile
phone via a cable (optional accessory).
Select mobile as the telephone connection
Press
.
Select MOBILE.
) is running, that the Konftel 300Wx is connected
®
15
button
Advertisement
Table of Contents
