Items Supplied; Technical Data; Appliance Description; Unpacking And Assembly - Kompernass KH 1410 Operating Instructions Manual

Items supplied

Cyclone Vacuum cleaner
Suction hose
Telescopic tube
Floor tool
Accessory holder
Crevice tool
Upholstery brush
Operating instructions
Order card

Technical data

Power supply: 220–240 V ~ /50 Hz
Power rating: min: 1400 W
max: 1800 W
Protection class: II

Appliance description

1 Dust collector carrying grip
2 Unlock button for housing lid
3 Exhaust filter cover
4 Storage bracket for floor tool
5 On/Off switch
6 Vacuum cleaner carrying grip
7 Suction power regulator
8 Foot button for power cable rewind
9 Power cable with power plug
0 Storage bracket for floor tool
q Housing cover
w Selector switch for carpet/hard surface
e Floor tool
r Storage hook
t Dust collector
z Suction pipe connector
u Height adjuster for telescope tube
i Storage hook
o Telescope tube
p Accessory bracket
a Suction hose
s Secondary air regulator
d Hand grip
f Crevice tool
g Upholstery brush (rotatable through 360°)

Unpacking and assembly

Unpacking

• Unpack the appliance and the accessories and
check that all listed items are available.

Assembly

Attention!
Assemble the appliance with the plug
ted from the power supply. The appliance could be
inadvertantly switched on.
1. Insert the suction pipe connector
socket on the vacuum cleaner until the locking
device engages.
2. Insert the hand grip
the telescope tube
3. Place the desired tool (floor tool
tool f or upholstery brush
„Changing tools") on the lower end of the
telescope tube
4. Adjust the telescope tube
length: Press the height adjustor
the telescope tube
d . When you have the desired length release
the height adjuster
a little further until it audibly engages.
The Cyclone Vacuum Cleaner is now ready for use.
- 3 -
9 disconnec-
z into the
d into the upper end of
o until it is firmly seated.
e , crevice
g , see chapter
o .
o to the desired
u down. Pull
o apart on the hand grip
u . Pull the telesopic tube o