Original Orientation; Original Type; Book Copy - Samsung ProXpress M458x Series User Manual

Understanding the copy screen

Original Orientation

Use this option to set the orientation of the original.
• Upright Images: Use this setting for an original document loaded with the
top toward the back of the machine.
• Sideways Images: Use this setting for an original document loaded into the
DSDF with the top of the document toward the left side of the machine, or
an original document placed on the scanner glass with the top of the
document toward the right side of the machine.

Original type

Use this setting to improve copy quality by selecting the appropriate document
type for the current job.
• Text: Use if the original is mostly text and very few or no images.
• Text/Photo: Use if the original is a mix of text and images.
• Photo: Use if the original is mostly or exclusively images.
N-up
Reduces the size of the original images and prints 2 -16 pages onto one sheet of
paper.
• Off: Disable this feature.
• N-Up: Copies the specified number of pages from the original onto one
sheet of paper.
• Orientation: You can select the direction in which information is copied on
a page.
Booklet
The machine automatically prints on one or both sides of the paper, which are
then folded to produce a booklet with all pages in the correct sequence. The
machine will also reduce and correctly adjust the position of each image to fit on
the selected paper.
• Off: Disables this feature.
• 1 Sided Originals: Copy one side of the original to one sheet of a booklet.
• 2 Sided Originals, Book: Copy each side of an original to one sheet of a
booklet.
• 2 Sided Originals, Calendar: Copy each side of an original to one page of a
booklet. The second side of each original is rotated 180 degrees so the text
will be upright in the booklet.

Book Copy

Use this feature to copy a book. If the book is too thick, lift the DSDF until its
hinges are engaged by the stopper, then close the DSDF. If the book or
magazine is thicker than 30 mm (1.18 inches), start copying with the DSDF open.
99
4. Copying