Table of Contents
Advertisement
2.3 CPU Installation
For the installation of Intel 775-Pin CPU,
please follow the steps below.
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
Step 1-2. Rotate the load lever to fully open po-
Step 1-3. Rotate the load plate to fully open po-
Step 2. Insert the 775-Pin CPU:
Step 2-1. Hold the CPU by the edges where are
Step 2-2. Orient the CPU with IHS (Integrated
Pin1
orientation
key notch
1 0
Before you insert the 775-Pin CPU into the socket, please check if the
CPU surface is unclean or if there is any bent pin on the socket. Do
not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
down and out on the hook to clear
retention tab.
sition at approximately 135 degrees.
sition at approximately 100 degrees.
marked with black lines.
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
orientation
key notch
775-Pin CPU
775-Pin Socket Overview
Pin1
alignment key
775-Pin Socket
alignment key
Advertisement
Table of Contents
