Table of Contents
Advertisement
2. Installation
Pre-iristallation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3.
Hold components by the edges and do not touch the ICs
4. Whenever you uninstali any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
2.1 CPU Installation
Step 1.
Unlock the socket by lifting the lever up to а 90° angle.
Step 2.
Position the CPU directly above the socket such that its marked corner
matches the base of the socket lever.
Stęp 3
Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to avoid bending of the pins.
Step 4.
When the CPU is in place, press it firmly on the socket while you push
down the socket lever to secure the CPU. The lever clicks on the side tab
to indicate that it is locked.
Step 5.
Install CPU fan and heatsink. For proper installation, please kindly refer to
the instruction manuals of your CPU fan and heatsink vendors.
A S R o c k K7VM2
Motherboard
Advertisement
Table of Contents
