•
•
•
Multi Control
Assigns an individual ID to the SET.
MENU →
•
•
MagicInfo
Available Modes
•
•
•
•
•
•
•
•
Downloaded From TV-Manual.com Manuals
Adjusting the PDP Display
Component
Note
MagicInfo can only be enabled when a network box is connected.
The HDMI port and network box cannot be connected at the same time.
→ ENTER →
→ → →
ID Setup
Assigns distinctive IDs to the SET.
ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
PC / DVI / BNC
AV
HDMI
MagicInfo
Component
Note
MagicInfo can only be enabled when a network box is connected.
The HDMI port and network box cannot be connected at the same time.
Note
The remote control can be used to select MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize MagicInfo fully.
→ ENTER →
67
,
→ [0~9]