Samsung SyncMaster P50HP User Manual page 28

4.
Wall Bracket Angle Adjustment
Adjust the bracket angle to -2° before installing it on the wall.
1.
2.
You can adjust the bracket angle between -2° and 15°.
Downloaded From TV-Manual.com Manuals
Remove safety pin (3) and insert the 4 product holders into the corresponding bracket
holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to
re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
A - PDP Display
B - Wall Bracket
C - Wall
Fix the product to the wall bracket.
Hold the product at the top in the center and pull it forward (direction of the arrow) to
adjust the angle.
Note
Introduction
27