Inserting And Removing The Interface Cable - Symbol LS4208 Quick Reference Manual

Quick Reference Guide
Introduction
The Symbol LS4208 scanner combines excellent scanning performance and advanced
ergonomics to provide the best value in a lightweight laser scanner. Whether used as a
hand-held scanner or in hands-free mode in a stand, the scanner ensures comfort and
ease of use for extended periods of time. Before programming the scanner, scan the
appropriate bar code(s), beginning on
Parts
Scan
Window
Trigger

Inserting and Removing the Interface Cable

To connect the interface cable, insert the interface cable's modular connector into the
cable interface port.
To remove the interface cable, unplug the installed cable's modular connector by
depressing the connector clip with the tip of a screwdriver.
Aiming
page 7, to communicate with the host.
LED
Beeper
Connector
clip
Cable interface
port
Interface cable
modular connector
To host
3