Remove The Brushroll - Dirt Devil FD50100 Manual

REMOVE THE BRUSHROLL

Note: Be sure to switch off the unit, unplug & remove the
clean & dirty water tanks before servicing.
1. Flip your carpet washer
on its side like this.
4. Keeping tension on
the belt, use two hands
to lift the brushroll up
and out.
For Belt Style 30 replacements, please call 1-800-321-1134 or visit our website at
www.DirtDevil.com to locate a dealer nearest you.
16
CAUTION
To reduce the risk of injury from moving
parts, unplug cleaner before servicing.
Rotate brushroll manually to make sure
belt is not twisted or pinched.
2. Use a Phillips screwdriver
to remove the 3 screws
here. Now pull cover off.
4. Replace belt cover and
secure with the three
screws.