Pioneer GM-D1004 Owner's Manual page 13

Installation
5 Install the amplifier with the use of
supplied tapping screws (4 mm × 18 mm
(1/8 in. × 3/4 in.)).
2 3
1 Tapping-screws (4 mm × 18 mm (1/8 in. ×
3/4 in.))
2 Floor mat or chassis
3 Drill a 2.5 mm (1/8 in.) diameter hole.
Notes
! Do not install the cords in places where they
touch the legs of a person as a disconnection
or short-circuit may result.
! Do not install the amplifier in a place where
water drop may be attached.
1
Section
04
13
En