Mechanism Deck - Sony Handycam Vision CCD-TRV107E Service Manual

CCD-TRV107E/TRV108E/TRV208E/TRV408E
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02, and
press the PAUSE button of the adjustment remote
commander.
Note : If the machine malfunctions (the operating mode changes by itself), connect the FK-2000 block, CF-2000 block.
Control switch block
(FK-2000) (12P)

Mechanism deck

FP-397 flexible board
Audio
Monitor TV
Video
A/V out jack
When you eject the cassette,
connect Pin q; and Pin qs (GND) of
CN710 on VC-272 board for 1 second.
CN710
12
1
7 2
- 2
V C
VC-272 board
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Info lithium battery
(L series)
Adjustment remote
commander (RM-95)
AC power
adaptor
Battery terminal board
Control switch block
(CF-2000) (22P)
2-10
CPC-jig for SB
(J-6082-539-A)
AC IN