Table of Contents
Advertisement
WWW.FREESERVICEMANUALS.INFO
DCR-IP210/IP210E/IP220/IP220E
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position)
or the touch panel.
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and
press the PAUSE button of the adjustment remote
commander.
CD-406 board
CN1000
FP-542 flexible board
Adjustment remote
commander (RM-95)
LANC jack
Cabinet (F) block assembly
Lens block assembly
CN4101
This wire must be connected
to eject the cassette.
Must be connected
CN452
(CPC)
CN461
CN001
CN456
CN455
VC-308 board
CN453
ST-076 board
CN4201
12/2
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
Control switch block
(PW-2980)
Cabinet (rear) block assembly
Control switch block
(SS-2980)
CN2020
DI-087 board
CN2019
CN463
CN458
Mechanism deck
2-18
Worlf of free manuals
WWW.NOSTATECH.NL
DI-087 board
DC-098 board
DC-IN connector
AC power
AC IN
adaptor
Advertisement
Table of Contents
