Removing The Fixing Assembly - Canon GP160DF Service Manual

A. Removing the fixing
assembly
1) Remove the two screws, and take off
the lower left cover.
2) Open the front cover, remove the 5
screws [1], and then remove the
delivery assembly cover.
When removing the delivery assem-
bly cover, please place your hands in
the positions shown in the diagram
on the right, and then lift the cover
up.
Note:
On the top of the delivery assembly
cover, inside the area marked
there is a tab. When the cover is lifted
up, the tab is disconnected from the
catch.
When replacing the cover, be sure to
place the cover tab correctly in the "U"
guide.
COPYRIGHT © 1999 CANON INC.
,
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 FIXING SYSTEM
[1]
Place your hands here to lift.
Figure 8-301
Be sure to insert correctly.
Figure 8-302
8-7