Telephone And External Devices (Mfc Models); Voice Operations (Mfc-1905 Only); Making A Telephone Call; Telephone Line Services - Brother DCP-1600E User Manual

Telephone and external devices
8
(MFC models)
Voice operations
(MFC-1905 only)
Voice calls can be made with the handset by
using the dial pad or by pressing
Book) twice and entering a two digit Speed
Dial number.

Making a telephone call

a
Pick up the handset.
b
When you hear the dial tone, enter a
number using the dial pad or press
(Address Book) twice and enter a two
digit Speed Dial number.
c
Replace the handset to hang up.
Telephone line
services
Setting the telephone line
type
If you are connecting the machine to a line
that features a PBX or ISDN to send and
receive faxes, it is necessary to change the
Telephone Line Type accordingly by
completing the following steps. If you are
using a line that features a PBX, you can set
your machine so that it always accesses the
outside line (using the prefix you entered), or
accesses the outside line when Tel/R is
pressed.
a
(For MFC-1900(E) and MFC-1905)
Press Menu, 0, 6.
(For MFC-1910W(E))
Press Menu, 0, 5.
b
Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
8
c
Do one of the following:
(Address
d
Do one of the following:
8
e
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
NOTE
• You can use the numbers 0 to 9, #, l
8
• You cannot use ! with any other
• If you choose On, pressing Tel/R (the
8
• If you choose Always, you can access
f
Press a or b to choose On or Always.
Press OK.
g
Press Stop/Exit.
If you chose ISDN or Normal, go to

step g.
 If you chose PBX, go to step d.
 If you want to change the current
prefix number, press 1 and go to
step e.
 If you do not want to change the
current prefix number, press 1 and
then OK. Go to step f.
and !.
(Press Tel/R to display "!".)
numbers or characters.
screen displays "!".) will let you access
an outside line.
an outside line without pressing Tel/R.
8
8
69