Brother HL-1210W Quick Setup Manual

HL‑1210W(E) / HL‑1211W / HL‑1212W
Quick Setup Guide
Version 0
ENG
Unpack the machine and check the components
Watch our FAQ Videos for help
with setting up your Brother
machine:
solutions.brother.com/videos.
1
Remove the packing materials and install the toner cartridge
2

Load paper in the paper tray

3

Connect the power cord and turn on the machine

Back
Printer LED Indications
POWER OFF
4
Connect the machine to your computer/mobile device
• Windows PC with a CD‑ROM drive, go to step
®
• Windows PC without a CD‑ROM drive, go to step
®
• Macintosh, go to step 4B
• Mobile device users with a WPS/AOSS™‑supported access point/router, go to step
Inbox/Starter Toner Cartridge
CD‑ROM
Front
SLEEP WARMING UP
READY
DEEP SLEEP COOLING DOWN
Dimmed 1 second interval
4A
4B
A5 Long Edge Paper Input
Support
To use A5 Long Edge paper.
RECEIVING DATA
TONER LOW
DATA REMAINING
0.5 second interval
4C
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
NOTE:
• The components included in the box and the AC power plug may differ
depending on your country.
• The available connection interfaces vary depending on the model.
• The illustrations in this Quick Setup Guide are based on the HL‑1210W or
HL‑1212W.
• You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres (6 feet) long.
Adjust the paper guides to fit
the paper being used.
Blinking:
REPLACE TONER PAPER JAM
or ON: OFF:
DRUM END SOON
REPLACE DRUM