Multiple Unit Wiring Diagram With Devices - Lowrance HDS-5 Installation Instructions Manual

Multiple unit wiring diagram with devices

Ethernet cables
LBS-1
NEP-1
The four yellow wires (Aces-
Fuse and fuse holder. The
sory Wake Up lines) from
red wire from each power ca-
each power cable should be
ble should be fused between
wired together.
the device and the battery.
The diagram above shows two HDS units and an LBS-1 connected via an
NEP-1. The power cable from each device contains a yellow wire. The yellow
wire is the Accessory Wake Up line. Connect the yellow wires together. When
the Accessory Wake Up line is used to connect units with the accessory wake
up feature, you can power up certain connected devices from one location,
including digital sonar optimizers and expansion ports.
23