Overview B&B Electronics Elinx family of Industrial rack mount Ethernet switches have been designed to meet light heavy Industrial communication requirements. The ESW626 Unmanaged family offers a variety of Industrial models. The switch configurations range from 26 ports RJ45 copper to RJ45 copper with multi mode, single mode, and or SFP gigabit ports.
Package Checklist The ESW626 will ship with the following items. ESW626 series unit Installation guide ESW626 Family Features 10Base-T, 100BaseTX, 100BaseFX,1000BaseSX/LX/LHX/ZX, 1000Base(X) 10/100Mbps, full and half duplex, MDI/MDIX auto -sensing 2 copper/SFP combo ports for Gigabit Ethernet ...
Back Panel On / OFF Switch Power Input RJ45 Port 10. Fiber, Combo SFP or RJ45 Port LED Description Status Description Green Power Applied No power Green System Ready System down Green 100Mbps 10/100 Copper Upper LED 10Mbps Green Link Blinking Activity 10/100 Copper Lower LED Not connected to network...
Ports RJ45 The RJ45 copper ports support auto-MDI/MDIX operation. This feature allows network connections to computers, servers, or other switches using straight-through or crossover cables (See Figure below). Straight-through cable connections: pins 1, 2, 3 and 6, at one end of the cable, are connected straight-through to pins 1, 2, 3 and 6 at the other end of the cable.
Page 10
speeds up to 1000 Mbps. Fiber optic communications will prevent harsh environment interfaces from being introduced into the network and will extend transmission distance. ESW626series-0913m Installation Guide Documentation Number: B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics –...
SFP Installation and Connection The SFP module is terminated with LC connectors. For installation, the module needs to be adjusted so as to be aligned correctly and then moved into the SFP slot until a click is heard. ESW626series-0913m Installation Guide Documentation Number: B&B Electronics Mfg Co Inc –...
To remove SFP modules lower removal bar and firmly pull transceiver out. Cabling Use unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable. 10Mbps: Category 3, 4, 5 or great cable 100Mbps: Category 5 or great cable 1000Mbps: Category 5e or great cable Maximum cable length: 100 meters (328ft.) 100Base FX SC Fiber The use of fiber optics has become prevalent in Industrial Ethernet network...
Fiber connection illustration Power Input Connections The ESW626 series accepts 18V-36VDC input voltage using terminal blocks. Specifications Power Requirements Voltage Range 18V-36VDC 25W MAX Connection Terminal Block Protection Reverse Polarity Protection RJ45 Ports Shielded 10/ 100BaseT(X) auto-sensing Full/Half Duplex MDI /MDIX auto-Negotiate Multi Mode Fiber 100Base-FX Distance...
Page 15
Wavelength 1310 nm Cable 62.5/125 um TX power -23.5 to -14dbm RX Sensitivity <-35dbm Connector Type Single Mode Fiber 100Base-FX Distance 20 km Wavelength 1310 nm Cable 9/125 um TX power -15 to -8dbm RX Sensitivity <-35dbm Connector Type SFP Ports Type Mini-GBIC SFP Ports Connector Type...
Page 16
EN61000-4-3 (RS), level 2 3V/meter EN61000-4-4 (EFT), level 2 Signal ports +/- 0.5kV D.C. Power ports +/- 1kV A.C. Power ports Earth ground ports3 EN61000-4-5 (Surge),level 2 Signal ports +/- 1kV D.C. Power ports +/- 0.5kV A.C. Power ports EN61000-4-6 (CS), level 2 Signal ports 3 V rms D.C.