Table of Contents Chapter 1 – Introduction ......................1 ESCRIPTION ....................1 ACKAGE HECKLIST ESW205/208 ..................... 2 FEATURES ESW205/208 O .................... 3 VERVIEW Front Panel ......................3 Dimensional Drawing ESW205 Series ..............4 Dimensional Drawing ESW208-2xx Series ............5 Dimensional Drawing ESW208-4xx Series ............6 LED I .......................
Chapter 1 – Introduction Description The ESW205/208 series are plug-and-play, Class 1 Div 2, heavy Industrial Ethernet switches with a compact IP30 DIN rail case. Switch configurations support 5 and 8 ports, all copper or with ST, SC fiber ports. They will support IEEE 802.3 for 10BaseT (10 Mbps), IEEE 802.3u for 100BaseTX and 100BaseFX (100 Mbps), and IEEE 802.3x, 10/100 Mbps, full and half duplex, MDI/MDX auto sensing.
ESW205/208 features 10BaseT, 100BaseTX, 100BaseFX 10/100 Mbps, full and half duplex, MDI/MDX auto sensing. Full / Half Duplex Back Pressure Flow Control Store and forward architecture Broadcast Storm control RJ45 shielded connectors Single mode, multi mode, ST, SC, 100BaseFX fiber connectors Compact IP 30 enclosure UL/cUL Class I Div 2 Groups A,B,C, and D Heavy Industrial Level3, EN61000-6-2 certified...
ESW205/208 Overview Front Panel P1 power LED P2 power LED L1 fiber port Link, Activity LED 100BaseFX, SC or ST Fiber Port Speed LED 10/100BaseT(X) RJ45 Port Link LED Power Terminal Block, P1 and P2 Quick Start Guide Documentation Number: ESW200series-1112qsg B&B Electronics Mfg Co Inc –...
LED Indicators Status Description Green ON Power Applied No power Green ON 100Mbps Speed LED 10Mbps Green ON Link Blinking Activity Link / Activity LED Not connected to network Green ON Link Blinking Activity Fiber LED Not connected to network Din Rail Mounting The din rail mounting clips are connected to the switch when shipped and ready to be mounted on a 35mm size din rail.
Panel Mounting The switch ships with 4 panel mount clips giving the user 6 different ways to panel mount the unit. Quick Start Guide Documentation Number: ESW200series-1112qsg B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics –...
RJ45 Ethernet Connections The ESW200 series RJ45 connectors will support 10BaseT and 100BaseTX communications. Each RJ45 port supports full or half duplex and MDI/MDX auto sensing. Below are the EIA/TIA T568A / B color standard and RJ45 pin out along with standard and crossover cable connections.
Page 14
100BaseFX Ethernet SC / ST Fiber Port The use of fiber optics has become prevalent in Industrial Ethernet data communications systems. Extending distance, high data rate capabilities, noise rejection and electrical isolation are just a few of the important characteristics that make fiber optic technology ideal for use in industrial applications.
Power Input Connections The ESW205/208 series accepts 12 to 36 VDC or 10 to 24 VAC input voltage using removable terminal blocks. UL Installation Information Electrical Ratings INPUT: ESW205, ESW205-XX INPUT: ESW208, ESW208-XX Power: 24VDC@ 4.7W Power: 24VDC@5.7 W 12 – 36 VDC@6.5W max. 10 –...
Wiring Terminals: One Conductor Per Terminal Use Copper wire only Wire Range: 25 to 12 AWG Tightening Torque: 4.5 Lb-in Temperature rating of field wiring - 105℃ minimum (Sized for 60℃ Ampacity) Ambient Temperature: Standard Temperature Models – -10℃ to 60℃ minimum/maximum surrounding air ambient. T4(or T4A) This equipment is suitable for use in Class 1, Division 2, Groups A, B, C and D hazardous locations, Or nonhazardous locations only.
Distance 20 km Wavelength 1310 nm Cable 9/125 TX power -15 - 8 dBm Rec Sensitivity -35 dBm Connector Type ST or SC Cover ST or SC LED Indicators Power Green ON solid Power applied Speed Green ON solid 100 Mbps Speed 10Mbps Link/Activity...
14,880bps (10Base-T), Transfer Rate: 148,800bps (100-Base-T) Packet buffer 64k Byte Address Table Size: Processing Type Store and Forward Broadcast Storm Control Automatic Full / Half Duplex Back Flow Control Pressure Flow Control Agency Approvals Hazardous Location UL/cUL Class I Div 2 Groups A,B,C, and D FCC Part 15, CISPR (EN55022) Generic Standard for (Heavy) Industrial...
Page 20
Earth ground ports3 Shock IEC 60068-2-27 Vibration IEC 60068-2-6 Free Fall IEC 60068-2-32 Certifications Certifications IP30 Certifications RoHS Certifications WEEE Environment Limits Heavy Industrial -10˚C to 60˚C Standard Temp Models Standard temp Heavy Extended Temp (-T) Industrial wide -40˚C to 75˚C Models temp -40 to 85˚C...