Table of Contents
Advertisement
The IBM 9309 Rack holds standard-sized electronic
equipment and distributes power for this equipment. All
models conform to the EIA (Electronic Industries
Association) RS-310-C standard for racks, panels, and
associated equipment.
Refer to the following symbols and to Figure 3-2 on
page 3-3 for the plan view of a one-rack system. Refer to
Figure 3-3 on page 3-4 for the plan view of a
multiple-rack system.
Warning: . Be sure to read "Limitations" on page 3-8.
This contains important information on the
requirements for the rack.
The symbols used in the plan views are in Fig. 3-1.
Cable Entry and Exit Area
(Base of Machine)
Power Cord Exit
(See Note.)
Standard Equipment Outline
(Shows machine with covers
closed.)
+
I~
Service Area Boundary
(Service clearances are
measured from machine
with covers closed.)
Casters
Single-Hinged
Door
Figure
3-1.
Plan View Symbol Legend
3-2
Notes:
1. Power cords are supplied in 4.3 m (14 feet) lengths,
unless otherwise noted in the specification pages.
2. Dimensions are shown in millimeters, with inches in
parentheses.
o
Advertisement
Table of Contents
