Table of Contents
Advertisement
o
o
Convenience Outlets
You are responsible for selecting and installing lightning
protection devices.
Install a suitable number of convenience outlets in the
computer room and the service representative area for use
by building maintenance personnel and service
representatives. Convenience outlets should be on the
lighting or other building circuits, not on the computer
power panel or feeder. Do not use the service convenience
outlets on IBM units for any purpose Qther than normal
servicing.
h,iF
t·!G'@
,tJ
a·ee
i4
Wi
£&9
Power Plugs and Receptacles
All power attachment cable plugs have approval for use
wi th the 9370 system and meet the relevant testing
laboratory or country/test-house standards. All power
cords have the appropriate plugs according to the ship
destination of the system.
Note:
See Appendix B, "Plugs and Receptacles," for types
of power cord plugs and receptacles.
'~·!fRi
"?"§if.
P!S¥t,;*, B'*,
&* ··P{¥igPie+
i
Additional Reference Material
For more information about domestic standards on site
preparation refer to:
o
National Fire Protection Association (NFPA) Standard
No. 75, Protection of Electronic Computer/Data
Processing Equipment (or applicable local or national
equivalent)
o
IBM General Information Manual, Installation
Manual-Physical Planning, GC22-7072.
Some of the topics in the IBM General Installation
Manual- Physical Planning that you may consider
reviewing for proper site preparation include:
o
Environmental Considerations
o
Acoustics
o
Electromagnetic Compatibility
•
Lighting
1-11
Advertisement
Table of Contents
