NETGEAR M6100 Hardware Installation Manual page 55

Loosen each captive screw.
2.
Pull the fan tray halfway out from the fan tray slot.
3.
This action disconnects the fan tray from the switch power.
Wait for the fan blades to stop turning.
4.
WARNING:
Be sure that all fan blade motion has ceased before continuing to
remove the fan tray.
Support the bottom of the fan tray with your free hand as you slide the fan tray completely
5.
out from the fan tray slot.
CAUTION:
Be sure that you use both hands to support the weight of the fan tray
during removal.
NETGEAR M6100 Switch Chassis
Replace M6100 Series Switch Chassis Components
55