Blade And Accessory Features - NETGEAR M6100 Hardware Installation Manual

Blade and Accessory Features

The NETGEAR M6100 Series Switch Blades are state-of-the-art, high-performance,
IEEE-compliant network solutions. They include powerful management features that you can use
to eliminate bottlenecks, boost performance, and increase productivity.
The M6100 Chassis Switch supports the following blades and daughter cards:
XCM8944 blade. Features forty Gigabit RJ-45 ports and four 10G ports (two SFP+ ports
•
and two 10GBASE-T ports).
XCM8948 blade. Features forty-eight Gigabit RJ-45 ports.
•
XCM8944F blade. Features forty Gigabit SFP ports and four 10G ports (two SFP+ ports
•
and two 10GBASE-T ports).
XCM8924X blade. Features twenty-four 10GBASE-T ports including sixteen SFP+ ports
•
(shared).
XCM89P PoE+ daughter card. For use with XCM8944 and XCM8948 blades.
•
XCM89UP UPoE daughter card. For use with XCM8944 and XCM8948 blades.
•
The M6100 Chassis Switch can be freestanding, or rack-mounted in a wiring closet or an
equipment room. For information about features for this product, visit the NETGEAR website
at http://www.netgear.com.
NETGEAR M6100 Switch Chassis
M6100 Switch Blades
10