Panasonic KX-TDA100 Programming Manual page 201

Hybrid ip-pbx, pc programming manual
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
Networking Data Transfer
Enables transmission of extension status data to connected PBXs in a network. This setting is only available
when
Port Type on this screen has been set to QSIG-Slave or QSIG-Master.
Value Range
No, Yes
Maintenance Console Location
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
Section 11 [9] Private Network
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Loopback Test started by Network
Enables a loopback test started from the network side, to be performed on the PRI23 card.
Note
The version of the PRI23 card must be 2.000 or later.
Value Range
Disable, Enable
Maintenance Console Location
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
Network Loopback Test (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
Extension Setting
Extension Setting parameters are applicable only for the PRI extension port.
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
PC Programming Manual
201

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda600

Table of Contents