Table of Contents
Advertisement
2-2. Adjusting Color
●
To select the display mode (Color Mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
User1
User2
sRGB
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Setting menu and the Mode menu cannot be displayed at the same time.
●
To perform advanced adjustments
The "Color" menu of the Setting menu allows you to set and save the independent color adjustment
for each mode.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on, and then adjust the monitor.
• Perform the range adjustment first when adjusting color for analog signals (see
automatically" (page
• The same image may be seen in different colors on multiple monitors due to their monitor-specific
characteristics. Make fine color adjustment visually when matching colors on multiple monitors.
Select this to define a desired set of parameter settings.
Suitable for color matching with sRGB compatible peripherals.
The mode menu
appears.
or
while the mode menu is displayed.
User1←→User2←→sRGB
16)).
Purpose
is pressed.
"To adjust color gradation
Chapter 2 Adjusting Screens
9
Advertisement
Table of Contents
