To Set Input Signal Selection; Displaying Monitor Information - Eizo DuraVision FDX1003 User Manual

●

To set input signal selection

Setting
Auto
Manual
Procedure
1. Choose "Monitor Settings" from the Adjustment menu, and press
2. Choose "Input Signal" from "Monitor Settings", and press
3. Select "Auto" or "Manual" with
4. Press to exit.
Note
• If you select "Auto", the monitor enters the power saving mode after all the PCs have entered the power
saving mode or have been switched off.

6-2. Displaying Monitor Information

This function allows you to display the model name, serial number, usage time, resolution, and input
signal.
Procedure
1. Choose "Information" in the Setting menu, and press
The "Information" menu appears.
Attention
• When you turn on the monitor for the first time, the usage time may be more than 0 due to a factory
inspection.
The monitor recognizes the connector through which PC signals are input.
When a PC is turned off or enters the power saving mode, the monitor automatically
displays another signal.
The monitor detects only the PC's signals currently displaying automatically. Select the
input signal for display using the
or .
Function
operation button.
.
.
.
25
Chapter 6 Reference