Spring Pre-Load Adjustment - Street Triple - Triumph Street Triple Owner's Handbook Manual

Spring Pre-Load Adjustment -
Street Triple
The rear suspension is adjustable for pre-load
only.
To change the rear suspension spring
pre-load setting, insert the adjustment tool
supplied in the tool kit into the slot in the
adjuster ring. Turn the adjuster ring clockwise
to increase spring pre-load,
anti-clockwise to decrease spring pre-load.
When delivered from the factory, the
pre-load adjuster will be set at position 1.
1
2
chry
1. Peg
2. Position 1
3. Spanner
Maintenance and Adjustment
Suggested Suspension Settings
Adjuster settings are counted from position
one with position one being with the adjuster
turned fully anti-clockwise. There are five
positions in total. Position one gives the
minimum amount of spring pre-load.
Riding Condition
and
Rider only
Rider and passenger
3
Suspension
Pre-load Setting
Position 1
Position 5
101