Maintenance and Adjustment
Front Suspension Settings
Spring Pre-Load Adjustment
The spring pre-load adjusters are located at
the top of each fork.
To change the spring pre-load, rotate the
adjuster clockwise to increase pre-load, or
anti-clockwise to decrease pre-load. Always
set the pre-load adjusters such that there are
an equal number of graduation lines visible
on both forks.
Note:
•
The motorcycle is delivered from
the factory with the spring pre-load
set at position 3 (three lines visible
above the fork top cap).
•
The left hand fork is fitted with a
rebound damping adjuster. The right
hand
fork
has
a
damping adjuster.
94
Rebound Damping Adjustment
The rebound damping adjuster is located at
the top of the left hand fork only.
To change the rebound damping force, rotate
the slotted adjuster clockwise to increase, or
anti-clockwise to decrease. Always count the
number of turns back from the fully
clockwise (maximum) position.
2
compression
chwk
1. Rebound damping adjuster (see
notes)
2. Spring pre-load adjuster
3. Fork top cap
Note:
•
The motorcycle is delivered from
the factory with the rebound set at
one turn back from maximum.
1
3