Front Suspension Settings
Spring Pre-load Adjustment
The
spring
pre-load
adjusters
located at the top of each fork.
To change the spring pre-load:
Rotate
the
adjuster
increase pre-load, or anti-clockwise to
decrease pre-load.
Always set the pre-load adjusters so
that there are an equal number of
graduation lines visible on both forks.
Note:
•
The motorcycle is delivered from the
factory with the spring pre-load set
at 11 turns anti-clockwise from the
maximum position.
•
The left hand fork is fitted with a
rebound damping adjuster.
•
The
right
hand
compression damping adjuster.
Maintenance and Adjustment
Rebound Damping Adjustment
The rebound damping adjuster is located
at the top of the left hand fork only.
are
To change the rebound damping force:
Rotate the slotted adjuster clockwise to
increase, or anti-clockwise to decrease.
clockwise
to
Always count the number of turns back
from the fully clockwise (maximum)
position.
1
fork
has
a
chwk
1.
Spring pre-load adjuster
2. Rebound damping adjuster
3. Fork top cap
Note:
•
The motorcycle is delivered from the
factory with the rebound set at
1.5 turns anti-clockwise from the
maximum position.
2
3
111