Rear Suspension
Rear Suspension Adjustment
The
following
Explorer
equipped with Triumph Semi Active
Suspension (TSAS):
•
Explorer XR
X
•
Explorer XR
-LRH
X
•
Explorer XR
T
•
Explorer XC
X
•
Explorer XC
-LRH
X
•
Explorer XC
.
A
See page
80
for more details on TSAS
settings and adjustment.
Explorer XR and Explorer XC Models
Warning
Ensure that the correct balance
between front and rear suspension is
maintained.
Suspension
could significantly change handling
characteristics leading to loss of
motorcycle control and an accident.
Refer
to
the
front
suspension setting charts for further
information or consult your dealer.
The Rear Suspension Unit (RSU) on the
Explorer XR and Explorer XC models is
adjustable
for
spring
rebound damping.
Note:
•
The motorcycle is delivered from the
factory with the rear suspension set
to the Solo (Normal) riding settings,
as shown in the Rear Suspension
Setting Chart (see page 154).
Maintenance and Adjustment
Spring Pre-Load Adjustment
models
are
1
civl
1.
Spring pre-load adjuster
The spring pre-load adjuster is situated
on the right hand side of the motorcycle,
at the top of the rear suspension unit.
To adjust the spring preload setting
rotate the 5 mm hexagon adjuster
clockwise to increase, or anticlockwise to
decrease.
Note:
imbalance
•
The setting is measured as the
number
anticlockwise
and
rear
clockwise (closed) position.
preload
and
of
adjuster
turns
from
the
fully
153