Epson EB-485W User Manual page 47

Adjusting Projected Images
e
Correct the position of the corner using the [
[ ] buttons on the remote control, or the [
and [Tele] buttons on the control panel.
When you press the [
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
], [ ], [ ], and
], [ ], [Wide],
w v
] button, the screen shown in step 4 is
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
When you are done, press the [Esc] button to exit the correction
menu.
Because Keystone was changed to Quick Corner, the corner
selection screen shown in step 4 is displayed the next time you press
the [ ] or [
w
H/V-Keystone if you want to perform horizontal and vertical
correction using the [
Settings - Keystone - H/V-Keystone
s
http://www.pureglare.com.au
] buttons on the control panel. Change Keystone to
v
] and [ ] buttons on the control panel.
w v
p.101
47